山西大同大学图书馆书目检索系统

Online Public Access Catalogue

题名/责任者:

Modern design technologies and experiment for advanced manufacture and industry : selected, paper from the 3rd International Conference on Engineering and Technology Innovation held in Kenting, Pingtung, Taiwan, R.O.C., October 31-November 4, 2014 / edited by Chien-Hung Liu.

出版发行项:

Pfaffikon [Switzerland] : Trans Tech, c2015.

ISBN:

9783038354604 (pbk.)

ISBN:

3038354600 (pbk.)

载体形态项:

2 v. (1,429 p.) : ill., graphs ; 24 cm.

丛编说明:

Applied mechanics and materials ; volumes 764-765

丛编统一题名:

Applied mechanics and materials ; v. 764-765.

会议名称:

International Conference on Engineering and Technology Innovation (3rd : 2014 : Kenting, Pingtung, Taiwan, P.R.C.)

附加个人名称:

Liu, Chien-Hung.

论题主题:

Technological innovations-Congresses.

论题主题:

Technology-Design-Congresses.

杜威等其它类号:

T-532

书目附注:

Includes bibliographical references at the end of each chapters and indexes.

内容附注:

PART 1. Chapter 1: Materials Processing Technologies and Analysis, Materials Engineering -- A Finite Element Approach to the Behavior of the ITZ -- A Study on the Mechanical Characteristics of Cu-CNT Composites by Extrusion Process -- Apparent Activation Energy for Predicting Compressive Strength of Concrete Using Blast Furnace Slag -- Characteristics of Graphite-Impregnated Resin-Bonded Cubic Boron Nitride Composites -- Characterization of Mechanically Alloyed A15083 Alloy and Composite and Consolidation by Equal Channel Angular Pressing -- Compensating for Creep Effects in One-Indent Nanoindentation Tests -- Deformation Behavior of Artificial Rock in the Split Hopkinson Pressure Bar Test -- Effect of Fiber Length on Direct Tensile and Impact Strength of Cmentitious Materials Containing Silica Fume -- Engineering Properties of Fiber Cementitious Materials -- Fabrication and Characterization of Amine Compounds Synthesized from Carbon Dioxide and Ammonia Water Using Transition Metal Doped TiO2 -- Microstructural Transformation of Titanium-Boron Carbide (114C) Powder Mixture during Spark Plasma Sintering -- Modelling of Texture Evolution in High Pressure Torsion by Crystal Plasticity Finite Element Method -- New Cold Forging Process of Retaining Pin Using FEM Based Simulation --

内容附注:

Numerical Simulation of Nanoindentation of Single Wall Carbon Nanotube Reinforced Epoxy Composite -- Optimization of Composite Laminates for Fundamental Frequency -- Overaged Samples and Growth of Eutectics Mg-6Gd-3.7Nd Based Alloys -- Performance Characteristics of Asphalt Mixtures with Additives -- Resistive Switching Characteristics in Boron Doped Zinc Oxide Films -- Supercritical CO2 Extraction of γ-Linolenic Acid from Spirulina platensis -- Surface Modification of ZrO2 by Silane and the Stability Study -- Thermal Process of Drilling for Metal Thin Films Using Femtosecond Laser -- Toughness and Thermal Properties of a Dimer Acid Modified Tetrafunctional Epoxy Resin -- An Experimental Evaluation of Structural Performance for High Strength Steel Stub Columns under Eccentric Loads -- Design and Evaluation of Asphalt Mixtures for Stress Absorbing Pavement Layers -- One-Step Gradual Forging Process by Using Direct Heating Billet within Die -- Structural Performance Evaluation of Built-Up Stub Steel Column with Various Steel Grades under Concentric Loading -- Pore Distribution and Durability of Cement Mortar by the Magnetic Resonance Imaging -- Depositing High-Performance Conductive Thin Films by Using Atomic Layer Deposition -- Stress Analysis and Improvement of Extrusion Dies Using Combination of FEM with Taguchi Method -- Study of CIGS Thin Films Solar Cell P2 Layer Scribing Using UV Laser -- Chapter 2: Advanced Design for Thermal and Mechanical Engineering -- A Flexible Bearing with 1-DOF Translation for High-Precision Mechanism -- A Layered-Rheology Model for Thin Film Elastohydrodynamic Lubrication of Circular Contacts -- A New Design for Enhancing the Performance of Hidden Ceiling Fan -- A New Hybrid-Driven Five-Bar Linkage Mechanism -- A Study on the General CAD Model for Rotary Milling Cutters -- Analysis of Main Steam Line Break for a Pressurized Water Reactor --

内容附注:

Analytical Study on Performance of a 250-kW Organic Rankine Cycle System under Off-Design Heat Source Temperatures by the Flow Rate Control Approach -- Approach for Hydraulic Pump Fault Diagnosis Based on WPT-SVD and SVM -- Bearing Performance Degradation Signal Simulation Based on Health Confidence Value Injection and FPGA -- Chaos and Nonlinear Dynamic Analysis of Porous Air Bearing System -- Contact Ratio of Space Curve Meshing Skew Gear Mechanism -- Crank Arrangement on the Dynamics of a Quadruped Walking Machine -- Creative Mechanism Design on Stroller Structure -- Design and Experiment of the Magnetorheological Damper with Multiple Poles -- Design of 3-Speed Bicycle Transmission Hubs -- Design of Cam Mechanisms with a Translating Follower Having Symmetrical Rollers -- Design of Novel Hydrodynamic Grooved Journal Bearing with Dual-Layer Herringbone-Grooved Patterns -- Design of the Cooling Module of LEDs Based on the Aluminum-Acetone Flat Plate Heat Pipe -- Development of Barrel Heating via Induction in Injection Molding Machine -- Dynamics Analysis of Energy Absorbing Device Based on Damped Dynamics Vibration Absorber -- Effective Numerical Analysis Method for Roll-to-Roll System Having the Large Nonlinearity Property -- Enhanced Fault Diagnosis of Bearings in Gearbox Based on Lucy-Richardson Deconvolution and Discussion -- Estimation for Temperature Distribution of PET Preform Surface under Multiple Lamps -- Feature Extraction Technology for Rolling Bearings Based on Local Tangent Space Alignment -- FEM Simulation and Experimental Verification on Rotating Compression Forming of Double-Layer Clad Ring Considering Shear Friction -- Finite Element Analysis on Natural Properties of a Micro Drill with Ultrasonic Vibration -- Finite-Element Analysis of the Magnetostatic Field of a Coaxial Magnetic Gear Device -- Health Assessment and Fault Diagnosis for the Heat Exchanger of the Aircraft Environmental Control Syste --

内容附注:

Heat Transfer Analysis for Line-Finned Heat Sink with Vertical Passages -- Hybrid Weights-Utility and Taguchi Method for Multi-Objective Optimization Problems -- Incipient Faults Identification in Gearbox by Combining Kurtogram and Independent Component Analysis -- Meshing Efficiency Analysis of Straight Spur Gear Pair -- Noise Reduction on Centrifugal Fan via the Quarter-Wave Resonator -- Nonlinear Transient Finite Element Analysis for Rifle's Power Transmission Mechanism with Structure Coupling Effects -- Performance of a Lead Rubber Damper under Cyclic Lateral Loading -- Power-Flow Path Analysis of an Existing 8-Speed Bicycle Drire Hub -- Prediction of Tribological Experiment Factors Relationship by Grey Theorem -- Real-Time Reliability Evaluation and Life Prediction for Bearings Based on Normalized Individual State Deviation -- Research of Mechanical Vibration Signal Classification Based on LMD -- Rotating Ring with Thermo-Elastic Damping and Point Masses -- Safety Assessment of Heave Compensator Using Multi-Body Dynamics -- Squeal and Thermal Analysis of Automobile Disc Brake Rotors -- The Engineering Design of Helical Spur Gear Transmission with Single Gear Pair for Electric Scooter -- Response of a Rectangular Thin Plate Subjected to In-Plane Narrow Band Noise is citation -- The Study on the Innovation Bicycle Design Using Functional Element Characteristics -- Theoretical and Experimental Investigation of Molecular Spring Isolator -- Thermal Analysis on Finned Heat Sink with Thin Porous Layers -- Thermal Characteristic Analysis CNC Multi-Grinding Machine -- Thermal Performance in a Rectangular Divergent Channel with Parallel Angled Ribs -- Thrust Study of a Novel PM Linear Synchronous Motor -- Analysis of DeNOx by SNCR in a Carbon Monoxide Boiler -- Analysis of Electromagnetic Force for the Linear Generator Wave Energy Converters --

内容附注:

Calculation of Combination Coefficient and Drag Coefficient for the Throwing Materials of Inertial Rotary Vibrating Screen -- Real-Time Life Prediction for Rolling Bearings Based on Nonparametric Bayesian Updating Method -- Chapter 3: Development and Technologies in Electrical and Electronic Engineering, Communication and Power Engineering Applications -- A Compact Dual-Band MIMO Antenna for WLAN Applications -- A Multiple Objective Fitness Function Design Scheme for GA-Based Cognitive Engines -- A Novel Algorithm for a Single-Phase Active Power Filter -- A Novel Decision Rule for Spectrum Sensing in Dynamic Traffic Circumstances -- A Reshaping Method for Wind Turbine RCS Reduction -- A Side-Peak Cancellation Scheme for Unambiguous BOC Signal Tracking -- A Single-Stage DC Uninterruptible Power Supply -- A Sub-1V 0.18um Output-Capacitor-Free Digitally Controlled LDO -- Analysis and Implementation of Rayleigh Fading Channel Using MATLAB -- Analysis for Temperature Rise of a Three-Phase Four Limbs Transformer by Soil Structure with DC Bias -- Applications of GaN-Based High Electron Mobility Transistors in Large-Size Devices -- Balancing for Lead-Acid Batteries of Electric Motorcycles -- Design and Implementation of a Microprocessor-Based PI Controller for PMSM Drives -- Electromagnetic Radiation Emission Model of Motor Drive System -- High Pumping Gain Dickson Charge Pump Using Improved Bootstrapped Technique -- Hybrid Analog/Digital Modulations Using Polarization Multiplexing OCDMA Scheme in Free Space Optics -- Impact of Parasitic Capacitor to the GaN HEMT Devices -- Improvement of On-Resistance Degradation Induced by Hot Carrier Injection in SOl-LDMOS -- Optimization of Holding Voltage for 5V Multi-Finger NMOS Using Voltage Stepping Simulation -- Simulation of P-Type Doping Profile Prediction Using Different Ion Implantation and Diffusion Model --

内容附注:

Unambiguous Composite BOC Signal Tracking Based on Partitioned Sub-Carriers -- Using GaN-Si FET Cascode Switches for Improving the Light-Load Efficiency of LLC Converters -- Using Wavelet Hybrid Self-Organizing Feature Map Network for V-I Based Multiple Harmonic Sources Classification -- Localization Experiments Based on Inertial Sensors for Navigation Applications -- Mitigation of Multipath Errors Using the Iterative Least Absolute Deviation Approach -- Neural Network Assisted Vector Tracking Loop for Bridging GPS Signal Outages -- Multipath Parameter Estimation Using the Unscented Particle Filter Based Code Tracking Loop for Non-Gaussian Noises -- Robustness Enhancement of GPS Vector Tracking Loop Using the Fault Detection and Exclusion Algorithm -- Vibration Influence for Transporting Photovoltaic Cell -- Implementation of Smart Home with Multi-Channel Technology -- Chapter 4: Control and Automation Technology, Mechatronics, Robotics for Manufacture and Industry -- 2-Phase Precision Alignment Visual Feedback Control System -- A Hybrid Intelligent System for Wind Shear Encountered Aircraft Landing Control -- Application of Lean Six Sigma to Develop a High Precision Relative Humidity Control -- Energy Comparisons of the Adaptive Tracking Control for a Linear Drive System -- Fault Diagnosis and Fault-Tolerant Control of Micro-Satellite Propulsion Mode Attitude Control -- Performance Assessment of Hydraulic Servo System Based on Radial Basis Function Neural Network and Mahalanobis Distance -- RBFNs Nonlinear Control System Design through BFPSO Algorithm -- Robust Hinfinity Control for Takagi-Sugeno Fuzzy Systems with Time-Varying Delays in State and Input -- Robust Output Observer-Based Control of Neutral Uncertain Systems with Discrete and Distributed Time Delays -- TIG Auto Welding Process Using Adaptive Wavelet Neural Network Controller -- Web-Based Supervisory Control System Based on Raspberry Pi --

内容附注:

Automatic Prediction Model of Ground Vibration for High-Speed Trains -- Design of Agent-Based Production Information Retrieval System Architecture for Injection Machines -- Two Dimensional Intelligent Feedrate Control Incorporating Stage Dynamics -- On Study Intelligent Heat Dissipation System -- An Improved IMM Estimator Combined with Intelligent Input Estimation Technique for Tracking Maneuvering Target -- Characterization of the Electrically-Actuated Micro Circular Plate -- Designing FIRA Medium-Sized Soccer Robot Vision System Using Particle Swarm Optimization -- Development of a Tracking System on the Mobile Robot -- Development of Orthogonal Electric Steering Loading System -- Fault Detection and Isolation for Hydraulic Servo System Based on Adaptive Threshold and SOM Neural Network -- Hybrid Autonomous Sensor-Based Recognition Fuzzy Mobile Robot System Designs -- Health Assessment of Hydraulic Servo System Based on Fractal Analysis and Gaussian Mixture Model -- Integration of 3G Wireless Image Transmission System with the Aerial Search and Rescue UAV.

内容附注:

PART 2. Integration of the Target Position Correction Software with the High Endurance Quadcopter for Search and Rescue Mission -- Self-Adaptive Fault Detection and Performance Assessment of a Rotary Actuator Based on Residual Analysis -- Visually-Guided Based Automatic Navigation for Disaster Detection Robots -- Using Laser Range Finder Obstacle Avoidance and Using TLD Positioning System of Mobile Robot -- Equivalent Circuit Construction of a Novel Ultrasonic Actuator -- Fault Detection for an Aileron Actuator under Variable Conditions Based on Bi-Step Neural Network -- Nonlinear Dynamic Characteristics of Magnetic Shape Memory Alloy Actuator -- Indoor Map Building by Laser Sensor and Positioning Algorithms -- Computer-Aided Dynamic Analysis and Simulation of Multibody Manufacturing Systems -- Performance Degradation Prediction for a Hydraulic Servo System Based on Elman Network and Support Vector Regression -- Development of an Unmanned Combat Vehicle with its Training System -- Chapter 5: Advanced Development for Information Technologies and Engineering, Networks and Software Applications, Data Acquisition and Processing, Intelligent Systems -- A Cloud Multi-Tenant Architecture for Developing Machine Remote Monitoring Systems -- A Method for Migrating Applications to Clouds -- A Novel Watermarking Method for Synchronous Transmission of Gong-Che Notation Score and its MIDI Information -- A Novel Wireless Data Acquisition Infrastructure for Manufacturing Equipment Based on Wi-Fi -- A Real-Time Data Filter for Interactive-TV Rating System -- A Storage-Independent Model for SPARQL-to-SQL Translation Algorithms -- A Study of Cloud Computing Based Context-Aware Healthcare App -- A Study on Simulating Landslides Using Unity Software -- An Anonymous NFC-Based Payment Protocol -- An Efficient Two-Mode Routing Protocol in Dense and Sparse Vehicular Ad Hoc Networks --

内容附注:

An Empirical Study on the Implementation and Evaluation of Gamifying Learning Motivated Achievement Model -- An Energy Balancing Cross Layer Scheme for Long Lifetime Wireless Sensor Networks -- An Intelligent Mouse Wheel-Design Concept and Application -- An Opportunistic Large Array Concentric Geographic Routing Algorithm with a Relay Node in Wireless Sensor Networks -- APP Rush, a Platform of Learning APP Development Skills for Information Management Students -- Cloud-Based Mechanical Design Oriented Python Program Development System -- Cooperative Car Video Share and Search System -- Cryptanalysis of Ahirwal-Sonwanshi ID-Based Remote User Authentication Scheme -- Depth Image Compression and Error Concealment for 3D Video Communication -- Design a Cloud Roll Check System via RFID -- Design and Implementation of Cloud-Dust Based Intelligent System -- Design of Cloud Load Balance Architecture for Web Servers -- Development of Cloud-Dust Based Intelligent Maximum Power Analysis System for Photovoltaic -- Energy-Efficient 2-Covered Path Routing for Distributed Wireless Sensor Networks with Variable Transmission Ranges -- Enhancements of SVM Speaker Recognition by Dynamic Time Wrapping -- Enhancing the Effect on Project Success through Information Presentation -- ET Detector: A Client-Based Solution to Detect an Evil Twin Access Point -- Evaluation of Traffic Data Collection Method -- FCA-Based Data Analysis for Discovering Association Rules in Social Network Service -- Home Security Service Enhanced with Information Stations -- Impact of Informal Network on Opinion Dynamics in Command and Control Network -- Improved OpenID Authorization Registration Process -- On the Performance of Weakly Connected Dominating Set and Loosely Coupled Dominating Set for Wireless Sensor/Mesh Networks -- Ontology Integration Framework Based on XMDR+ -- Opportunistic Frame Forwarding in Wireless Mesh Networks --

内容附注:

P-AODV: Energy-Aware Routing for Wireless Mesh Networks -- Secure Data Synchronization over a Mobile Peer-to-Peer Network -- Spelling Check Combined Language Models and Knowledge Resources for Printer Drivers -- Taurus: Preventing Stealthy SMS Activities on Android -- The Improved Customer Satisfaction Prediction System on Airlines Service by Using Cloud Computing Based Intelligent Strategy System -- Three-Dimensional Object Encoding Approach Using Computer-Generated Integral Imaging and Random Phase Encoding -- Time Series Forecasting with Stochastic Markov Models Based on Fuzzy Set and Grey Theory -- Toward a Unified Approach to Software Reliability Modeling under Imperfect Debugging -- Toward Meta-Software Engineering Multistage Process -- Using Serial Episode Mining to Identify Internet Attacks -- Video Image Encryption Technique Using Maximum-Length Cellular Automata and Arnold's Cat Map -- POI Detection and Route Identification Using Smartphone Sensor Data -- Predicting Personal Transportation Modes Using Uncertain Smartphone Sensor Data -- Using Multi-Core to Debug Interactive Applications -- Chapter 6: Modern Design for Green and Environmental Technologies, Energy-Saving Technologies, Structural and Civil Engineering, Applied Mechanics Applications -- A New Procedure for Structural Fault Estimation Using a Prescribed Eigen-Structure -- A Simulation Research for Railroad Freight Car-to-Car End Impact Based on Numerical Analysis -- A Study on Shear Strength of the Perfobond Rib Shear Connector for Composite Beam -- Acceleration Response and Serviceability Performance of a 51-Story Building during Typhoon Aere -- An Experimental Study on Residual Strength and Deformation Recovery of RC Beams Strengthened with FRP Plate -- Centrifuge Seismic Test on Seismic Behavior of Pile Group in Liquefiable Soil --

内容附注:

Comparison between Simulation of Reduced Scale Vertical Concrete Cask under the Earthquake Effect and Experimental Result -- Damage Diagnosis of a Structure in Time-Frequency Domain -- Debris as Resources Applied in Wild Creeks Remediation Work -- Diagnostics of a Historical Bridge Using Measuring Methods and Inverse Analysis -- Dynamic Equilibrium Analysis and Simulation of Submerged Kuroshio Generator System -- Energy-Saving Operation Strategies for Air-Conditioning Systems in Response to Challenges Posed by Atmospheric Environment of Taiwan -- Experimental Evaluation of Shear Behaviors of Concrete Deep Beams with GFRP Shear Reinforcement -- Fault Source Characterization of Probabilistic Seismic Hazard Analysis for the Sites of Offshore Wind Turbine in Taiwan -- Fracture Parameters of Fly Ash and GGBS Based Geopolymer Concrete -- Geologic Hazard Assessment of Slopeland Villages Using Remote Sensing Techniques -- Integrating Domestic Air Conditioner with Solar Water Heater of the Development of an Energy-Saving Heating System -- Numerical Investigation on Column Flange Thickness for Cold-Formed Steel Top-Seat Flange Cleat Connection -- Response of Concrete Filled Carbon Sheet Tube Column under Axial and Lateral Loads -- Seismic Analysis for Pile Foundations in the Liquefiable Soil Layer Using FLAC3D -- Seismic Response for a One-Third Scale-Down Vertical Cylindrical Cask Specimen Using Shaking Table Testing -- Seismic Response for a Reinforce Concrete Specimen Considering Corrosive Hazards -- Seismic Testing and Verification of a 1/25 Scaled-Down Reinforced Concrete Specimen for the Reactor Building -- Shear Strength of the Perfobond Connection of a Steel-Concrete Composite Slim Floor System -- Structural Damage Identification in Vehicle-Bridge System Based on Measured Dynamic Response -- Technology and Conclusions from Long-Term Monitoring of Large Span Roof Timber Construction --

内容附注:

The Effect of Seismic Design Methods on Design Eccentricities in Building with Planar Irregularities -- The Life Cycle Assessment of Carbon Dioxide Emission of Four Major Sewage Treatment Plants in Taiwan -- Vertical Connector Performance of Modular Roadway Slab -- Effective Critical Section Evaluation of a Reinforced Concrete Flat-Plate Slab with Openings for its Punching Shear Strength Estimation -- Finite Element Analysis of Non-Uniform Beam Made of Axially FGM Subjected to Multiple Loads -- Fracture Analysis of a Semi-Elliptical Surface Crack in Hollow Cylinders -- Frequency Reliability Sensitivity and Robust Analysis for the Random Axial Vibration of Rod Systems -- Impact Analysis of Composite Laminate Shell Structures -- Non-Linear Dynamic Analysis of a Reinforced Concrete Bridge Column under Vehicle Impact Loading -- Wind Oscillation Analysis for Suspension Bridge -- Large Amplitude Free Vibration of Nanobeams Subjected to Magnetic Field Based on Nonlocal Elasticity Theory -- Design and Simulations of Water Purification Heating System in Cold Rural Areas -- Centrifuge Modeling on Pile Behavior Subjected to Cyclic Lateral Loadings -- Chapter 7: Contemporary Development for Optical Engineering, Image Processing, Quality and Analysis, Measurement, Instrumentation and Detection Technologies -- A Novel Auto-Focus Measurement System for Mesh Membrane -- Design of a Two-Photon Single-Laser Optical Data Storage System in a Multilayer Structure -- Developing a Novel Stereovision Scheme for Improving Accuracy of Depth Estimation in Robotic Vision Systems -- Efficient Neural Processor for Camera Distortion Correction -- Enhanced Design for AWG-Based Dynamic Reconfigurable Free-Spectral-Range Group Hopping Coder/Decoders to Protect against Eavesdropping -- Image Quality Improvement with Liquid Field Lens Scheme in 9x Zoom Lens Intermediate Optics --

内容附注:

Photoluminescence and Recombination Mechanisms in Nitride-Based Multiple Quantum Wells -- Photoluminescence Properties of Eu+ Activated CaAlSiN3 Red Phosphors with Various Eu+ Contents -- Integration of Lenticular Displays with Image Switching and Infrared Watermark -- Smart Tourism: Exploring Historical, Cultural, and Delicacy Scenic Spots Using Visual-Based Image Search Technology -- An Evaluation Eye Diagram of a High-Reliability FPGA Platform for High-Resolution Camera -- Study of the Dynamic Image Stabilizer -- Weight Switching Tri-State Median Filter -- Design of a High-Reliability FPGA Platform for High-Resolution Image Process System -- A Real-Time NCC-Based Template Matching on Modern CPUs -- An Innovative and Reliable Wireless Angular Accelerometer Made Directly on a Flexible Substrate without Moving Parts -- Applying Structured Light on Cylinder Straightness Detection Using Break Line Method -- Efficient Calibration Tool for Thermistor Temperature Measurements -- Illumination Variant Face Detection System Using Hierarchical Feature Method -- Large Non-Ambiguity Range and Precise Absolute Distance Measurement with Dual Mode-Locked Fiber Lasers -- Multimodal Sensor Fusion for Indoor Occupancy Determination -- A Height Measurement Based on Laser Triangulation Probe and a Two Dimensional Image Measurement System for Smart Manufacturing -- A Novel Calibration Method for Multi-Hole Pitot Tubes -- Flow Control and Thermal System Design for Wet Cell in the Scanning Electron Microscope -- Nonlinear Magneto-Electric Response Characteristics of Giant Mag-Netostrictive-Piezoelectric Composite Sensors in Harmonic and Stochastic Excitation --

摘要附注:

RFID-Based Thermal Convection Non-Floating Type Accelerometer with Stacking Material for Heater and Thermal Sensors -- Chapter 8: Innovation in Management and Design, Related Topics -- Modified Mnet for Performance Improvement in Moodie Learning Management System -- Airport Access Road Traffic Demand Estimation -- New Lane Departure Warning System Based on Side-View Cameras -- Spatial Evaluation of Roadway Infrastructure for Safety Improvement on Expressways -- FCM based Hybrid Evolutionary Computation Approach for Optimization Power Consumption by Varying Cars in EGCS -- A New Kinect-Based Scanning System and its Application -- Sliding Operation for Touch Screen - A Design Concept of Two-Stage Sliding -- A Kansei-Oriented Approach for Product Form Design -- A Novel Non-Decreasing Temperature Based Simulated Annealing for Flow Shop Problems -- Study on 3D Meaningful Mobile Gamification Learning Outcome Assessment — An Example of Blood Circulation Lesson -- Using the Event Classifier System to Forecast the Stock Price: An Empirical Study of Taiwan Financial Market -- Fusing Multiple Strategies in Population-Based Optimization Algorithm.

豆瓣简介：